9th International Science Congress (ISC-2019).  International E-publication: Publish Projects, Dissertation, Theses, Books, Souvenir, Conference Proceeding with ISBN.  International E-Bulletin: Information/News regarding: Academics and Research

Characterization of Seam Strength and Seam Slippage on Cotton fabric with woven Structures and Finish

Author Affiliations

  • 1Department of Textile-Fashion Technology, Bannari Amman Institute of Technology, Sathyamangalam, Erode Dist., Tamil Nadu, INDIA
  • 2 VSB College of Engineering, Karur, Tamil Nadu, INDIA

Res. J. Engineering Sci., Volume 1, Issue (2), Pages 41-50, August,26 (2012)

Abstract

In the present work, the quality of fabric samples was controlled, now the garment longevity depends on the seam parameters like various factors such as seam strength, seam slippage, seam puckering and yarn severance. In the present work, fabrics of different blend proportions ie., cotton and was prepared with different woven structures like plain, twill, satin. These fabrics were treated with fabric softener like silicone. After all the above trials the seam strength and seam slippage were studied for both finished and unfinished materials. The seam strength and seam slippage were studied using instron tensile strength tester, the studies were performed at 6.0mm breaking load and it was observed that the breaking load of unfinished samples were depicting higher strength than the finished without seam opening. The fabric samples of plain weave were found to have greater seam performance than the twill and satin. Various other factors influencing the seam strength and seam slippage are also discussed in detail.

References

  1. Lindberg J., Westerberg L. and Svenson R., Wool fabrics as garment construction material, Journal of the Textile Institute, 51, T1475-T1492 (1960)
  2. Booth J.E., Principles of textile testing: an introduction to physical methods of testing textile fibres, yarns and fabrics, London: Heywood Books, (1968)
  3. Gersak J. and Knez B., Reduction in thread strength as a cause of Loading in the sewing Process, International Journal of Clothing Science and Technology, 3(4), 6-12 (1991)
  4. Glock R.E. and Kunz G.I., Apparel Manufacturing: Sewn Product Analysis, New Jersey: Englewood Cliffs, (1995)
  5. Rosenblad W.E. and Cednas M., The influence of fabric properties on seam puckering, Clothing Research Journal, 1(3), 20-26 (1973)
  6. Stylos G. and Lloyd D.W., Prediction of seam pucker in garments by measuring fabric mechanical properties and geometric relationship, International Journal of Clothing Science and Technology, 2(1), 6-15 (1990)
  7. Shimazai K., Studies on seam strength- tensile strength of seam sewed by hand, Japanese Resource Association of Textile End-Uses, 20, 317-327 (1976)
  8. Bhalerao S., Budge A.S. and Borkar S.P., Seam performance in suiting’s, Indian Textile Journal, 107(11), 78-81 (1997)
  9. Behera B.K. Chand, S., Singh, T.G. and Rathee, P. Sewability of denim, International Journal of Clothing Science and Technology, 9(2), 128-140 (1997a)
  10. Behera B.K. and Sharma S., Low stress behaviour and sewability of suiting and shirting fabrics, Indian Journal of Fiber and Textile Research, 23(4), 233-241 (1998)
  11. Choudhury P.K., Improvement in Sewing performance of jute bags, Indian Journal of Fiber and Textile Research, 25(3), 206-210 (2000)
  12. Lin T.H., Construction of predictive model on fabric and sewing thread Optimization, Journal of Textile Engineering, 50(1), 6-11 (2004)
  13. Mohanta R.A., study on the influence of various factors on seam performance, Asian Textile Journal,15(10), 57-62 (2006)
  14. Mehta P.V., An introduction to quality control for apparel Industry, Japan: ISN international, (I985)
  15. Solinger J., Apparel Manufacturing Handbook, Columbia: Bobbin Blenheim, (1989)
  16. Carr H. and Latham B., The Technology of Clothing Manufacturing, Oxford: Blackwell Scientific Publications, (1995)
  17. Chmielowice R., Seam strength factors, Textile Asia, 18(3),94-97 (1987)
  18. Tarafdar N., Kannakar R. and Mondol M., The effect of stitch density on seam performance of garments stitched from plain and twill fabrics, Man-made Textiles in India, 50(8),298-302 (2007)
  19. Choudhry K., Sewability of suiting fabrics, M.Sc Thesis, University of Delhi (1995)
  20. Kawabata S. and Niwa M., Fabric performance in clothing and clothing manufacture, Journal of the Textile Institute, 80(1), T40-T52 (1989)
  21. Kawabata S. and Niwa M., Objective measure of fabric mechanical property and quality, International Journal of Clothing Science and Technology, 3(1), 7-4 (1991)
  22. Minazio P.G., The fabric processing performance and its role in predicting the appearance of men's wool suit jackets, International Journal of Clothing Science and Technology, 10(3/4), 182-190 (1998)
  23. Bhatnagar S., Cotton sewing thread and Siro system,Indian Textile Journal,102(2), 30-31 (1991)
  24. West D., Sewing threads-how to choose, Textile Asia, 24(5),82-87 (1993)
  25. Behera B.K., Shakun S., Snrabhi S. and Choudhary S., Comparative assessment of low stress mechanical properties and sewability of cotton and cotton banana union fabric, Asian Textile Journal, 9(5), 49-56 (2000)
  26. Mukhopadhyay A., Sikka M. and- Karmakar A.K., Impact of laundering on the seam tensile properties of suiting fabric, International Journal of Clothing Science and Technology, 16(4), 394-103 (2004)
  27. Rengasamy R.S., Kothari V.K., Alagirusamy R. and Modi S., Studies on air-jet textured sewing threads, Indian Journal of Fiber and Textile Research, 28(3), 281-287 (2003)
  28. Gribaa S., Amar S.B. and Dogui A., Influence of sewing parameters, upon the Tensile behavior of textile assembly, International Journal of Clothing Science and Technology, 18(4), 235-246 (2006)
  29. Gupta B.S., Leek F.J., Baker R.L., Buchanan D.R. and Little T., Directional variations in fabric properties and Seam quality, International Journal of Clothing Science: and Technology, 4(2/3), 71-78 (1992)
  30. Krasteva D.G. and Petrov H. Investigation on the seam's quality by sewing of light fabrics, International Journal of Clothing Science and Technology, 20(1), 57-64 (2008)
  31. Ukpanmwan J., Mukhopadhvay A. and Chatterjee K.N., Sewing threads, Textile progress, 30(3/4), 1-91 (2000)
  32. Sandow K. and Hixon D. Thread selection made simple, Bobbin, August, 46-49 (1999)
  33. Kadolph S.J., Langfoid A.L., Hollen N. and Saddler J., Textiles, New York: Macmillan (1998)
  34. Res. J. Engineering Sci. International Science Congress Association 50 properties, Textile Asia, 25(9), 46-49 (1994)
  35. Ito K., Problems in recently manufactured worsted Men's suiting from the point of View of suit quality, International Journal of Clothing Science and Technology, 9(3), 200-202 (1997)
  36. Behera B.K. Evaluation and selection of sewing thread, Textile Trends, 39(12), 33-42 (1997b)
  37. Gurarda A., Investigation of the seam performance of PET/Nylon-elastane woven fabrics, Textile Research Journal, 78(1), 21-27 (2008)
  38. Kothari V.K. ed. Testing and quality management. New Delhi: IAFL publications, (1999)
  39. Sundaresan C., Salhotra K.R. and Hari P.K., Strength reduction in sewing threads during high speed sewing in industrial Lockstitch machine part II: Effect of thread and fabric properties, International Journal of Clothing Science and Technology, 10(l), 64-79 (1998)
  40. Miguel R.A.L., Lucas J.M., Carvalhe M.D.L. and Manich A.M., Fabric design considering the optimization of seam slippage, International Journal of Clothing Science and Technology, 17(3/4), 225-231 (2005)
  41. Nergis B.U., Performance of seams in garments. African Textiles, Dec/Jan. 29-31, (1997/1998)